L’outil de licence Creative Commons du formulaire de soumission ne fonctionne pas actuellement. Pour ajouter une licence CC à votre thèse ou publication, contactez ruor@uottawa.ca après le dépôt. -- The Creative Commons licence tool in the submission form is currently unavailable. To apply a CC licence to your thesis or publication, contact ruor@uottawa.ca after the deposit.

Towards the Development of Sustainable Organic Thin-Film Transistors

dc.contributor.authorAli, Mohsin
dc.contributor.supervisorLessard, Benoit
dc.date.accessioned2026-11-19T18:13:19Z
dc.date.issued2026-11-19
dc.description.abstractElectronic devices are used for tasks ranging from health monitoring and environmental sensing to communication and consumer electronics. As demand for these devices grows, so does the volume of electronic waste (e-waste) they leave behind, most of which is exported, incinerated, or sent to landfills, where non-degradable components such as semiconductors, dielectrics, and metal electrodes can persist for years. This growing problem has motivated interest in transient electronics: devices designed to intentionally degrade after their functional lifetime. For biodegradable materials to be viable in these devices, they need to be solution-processable and capable of controlled degradation, all while maintaining the electrical performance expected of conventional electronic materials. This thesis focuses on the development of low-voltage operation sustainable organic thin-film transistors (OTFTs) that combine strong electrical performance with reduced use of non-degradable materials and engineered, controllable degradation pathways. The first study focused on integrating a biodegradable dielectric with a biodegradable substrate to build a cytocompatible and fully disintegrable low-voltage n-type OTFT. I paired a fluorinated silicon phthalocyanine (F10-SiPc) semiconductor with a bilayer poly(vinyl alcohol) (PVA) and poly(caprolactone) (PCL) dielectric deposited on a polylactic acid (PLA) substrate. This bilayer dielectric substantially lowered the threshold voltage (VT) compared to a conventional SiO2 dielectric while maintaining comparable electron mobility (μ), and I showed that the complete device could disintegrate in phosphate-buffered saline solution within 20 days without producing degradation products toxic to cultured fibroblasts. In the second study, I report that a non-biodegradable diketopyrrolopyrrole-based semiconducting polymer (DPP2T) can be blended with the biodegradable polymers PLA and PCL to reduce the amount of active semiconductor (DPP2T) required in an OTFT by roughly 70-80%. Rather than sacrificing performance, the right PLA-PCL ratio actually improved device performance over neat DPP2T by increasing μ, lowering the VT, and improving Ion/off, while also improving long-term stability under ambient air exposure. In my last study, I built on this dielectric-and-substrate foundation to address a key limitation: once assembled, these devices dissolved into a single system, making it difficult to separate or recover individual materials. I designed a fully sustainable p-type OTFT using an imine-linked degradable semiconducting polymer (PDPP-TIT) paired with a PVA/UV-crosslinked-PCL bilayer dielectric on a PLA substrate, engineering each layer to respond to a different degradation trigger. This device also achieved a reduction in VT relative to a conventional SiO2 dielectric, and I demonstrated that the semiconductor and dielectric could be selectively dissolved under acidic conditions while the substrate degraded separately under basic conditions, leaving only recoverable gold micro/nanoparticles behind. Finally, this work demonstrates that degradable, commercially available polymers can be systematically blended, stacked, and chemically engineered to produce OTFTs that match or exceed the performance of conventional devices, while reducing reliance on non-degradable materials and enabling controlled, multi-step degradation for environmentally responsible end-of-life electronics.
dc.identifier.urihttp://hdl.handle.net/10393/52251
dc.language.isoen
dc.publisherUniversité d'Ottawa | University of Ottawa
dc.subjectSustainable polymer
dc.subjectBiodegradable polymer
dc.subjectThin-film deposition
dc.subjectDegradation
dc.subjectOrganic thin-film transistors
dc.titleTowards the Development of Sustainable Organic Thin-Film Transistors
dc.typeThesisen
thesis.degree.disciplineGénie / Engineering
thesis.degree.levelDoctoral
thesis.degree.namePhD
uottawa.departmentGénie chimique et biologique / Chemical and Biological Engineering

Fichiers

Trousse originale

Voici les éléments 1 - 1 sur 1
En cours de chargement...
Vignette d'image
Nom:
Ali_Mohsin_2026_Thesis.pdf
Taille:
9.4 MB
Format:
Adobe Portable Document Format

Trousse de licence

Voici les éléments 1 - 1 sur 1
En cours de chargement...
Vignette d'image
Nom:
license.txt
Taille:
2.51 KB
Format:
Item-specific license agreed upon to submission
Description: